This is a floating up weller built by John that we based ours on. The left side attaches to an anchor and as the water flows by a venturie effect is created drawing the water up thru the screen.

Clam_project_057.JPG (46840 bytes) Clam_project_058.JPG (47018 bytes)

The buckets turned udside down.

Clam_project_059.JPG (38180 bytes)

Screen to hold the clams in and keep the critters out.

Clam_project_060.JPG (41088 bytes)

The float uses a pine board on top, a 1" piece of foam and a piece of plywood to hold the buckets. This photo shows the arrangement upside down.

Clam_project_061.JPG (33311 bytes)